5. Full/Half Duplex Mode
RJ-45 TP port supports full or half-duplex mode, which is configured by NETSETUP.EXE utility and
LAN driver options. BNC port supports half-duplex only. The operating mode should match with the
remote link device's working condition and status.
6. Diagnostic & Driver Setup
Diagnostic program lets you test PCI Duo/TP Node ID address, half-duplex mode, board
configuration, or the cable connection between any two stations. Please refer to the Driver Diskette
for more information and driver setup procedures.
7. Technical Specifications
!
Standards : IEEE 802.3 Ethernet 10Base-2/10Base-T
!
Connector :
-- Duo Board > RJ-45 (TP) and BNC connectors
-- TP Board > RJ-45 (TP) jack
!
Cable and Distance :
-- Category 3/5 unshielded or shielded twisted pair, max 100 meters
-- 0.2" diameter RG-58A/U, 50 ohm coaxial cable, max 185 meters
!
Data Transfer Mode/Speed :
-- PCI bus
-- 10 Mbps speed
-- TP Port supports full or half-duplex mode
-- BNC port supports half-duplex mode only
!
Link and Activity LEDs
!
Power Requirement : 2.0A @+5V
!
Ambient Temperature : 0
o
to 50
o
C
!
Humidity : 5% to 90%
!
PCB Dimensions : 123 x 61 mm (L x H)
!
Emission : FCC Part 15 Class A & CE Mark