PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
XLT PLUS
900MHz RF Transceiver
MODEL 461-40800-DC
DESCRIPTION
The A
IR
-E
AGLE
XLT
P
LUS
RF
T
RANSCEIVER
provides two-way wireless
control of electronic equipment and apparatus at distances up to 1 mile
away (longer ranges can be achieved with external antennas). This
model comes equipped with eight dry contact inputs and eight relay
outputs. This allows the user to not only transmit information out, but
receive a confirming signal back that the operation was performed A
terminal strip has been provided for interfacing with external dry
contact inputs as well as dry contact relay outputs. The Air-Eagle XLT
TRX is user-programmable for up eight network frequencies to allow
multiple systems to operate simultaneously in the same area.
INSTALLATION
DISCONNECT DC Power from all equipment before installation.
1.
Mount the A
IR
-E
AGLE
XLT PLUS R
ECEIVER
in a convenient location.
2.
Install input and output wiring to terminal strip.
3.
Install antenna to connector located on the right side on the
enclosure.
4.
Connect supplied power input cable to your external power source.
DIMENSIONS
TERMINAL STRIP WIRING
RELAY OUTPUTS
1
N/O Relay #1
10 N/O Relay #4
19 N/O Relay #7
2
C Relay #1
11 C Relay #4
20 C Relay #7
3
N/C Relay #1
12 N/C Relay #4
21 N/C Relay #7
4
N/O Relay #2
13 N/O Relay #5
22 N/O Relay #8
5
C Relay #2
14 C Relay #5
23 C Relay #8
6
N/C Relay #2
15 N/C Relay #5
24 N/C Relay #8
7
N/O Relay #3
16 N/O Relay #6
8
C Relay #3
17 C Relay #6
9
N/C Relay #3
18 N/C Relay #6
CONTACT INPUTS
1
Common Input 1
10 Input 5
2
Input 1
11 Common Input 6
3
Common Input 2
12 Input 6
4
Input 2
13 Common Input 7
5
Common Input 3
14 Input 7
6
Input 3
15 Common Input 8
7
Common Input 4
16 Input 8
8
Input 4
17 Not Used
9
Common Input 5
18 Not Used
DC INPUT
Terminal #1
(-) 9-36VDC Input
Terminal #2
(+) 9-36VDC Input
