BWI Eagle AIR-EAGLE XLT PLUS 461-5000-DC, Product Information Bulletin

Page: 2 / 3

AIR-EAGLE
®
XLT PLUS
High Power 900MHz RF Receiver
MODEL 461-5000-DC
RELAY OPERATION
Relays energize and de-energize based on commands received from the
transmitter. See table below for relay mode configuration for this receiver:
TX Signal Received Relay Function
Input 1 Closed Relay 1 energizes, maintained momentary
Input 2 Closed Relay 2 energizes, maintained momentary
Input 3 Closed Relay 3 energizes, maintained momentary
FREQUENCY & OPTIONS SET-UP
This unit is shipped from the factory with SEL1 switches in the open
positions. The safety off-delay on all relays is 5 seconds and the unit is
operating on frequency #1. If you wish to change the default setting, follow
the instructions below:
1) Remove power from unit then remove top cover.
2) Select desired network frequency and safety delay options using
table below.
3) Reattach cover and apply power. Programming is now complete.
FREQUENCY SET-UP
SEL1
(SW5-7)
Network
Frequency
SW5 SW6 SW7
1 (default) OPEN OPEN OPEN
2 CLOSED OPEN OPEN
3 OPEN CLOSED OPEN
4 CLOSED CLOSED OPEN
5 OPEN OPEN CLOSED
6 CLOSED OPEN CLOSED
7 OPEN CLOSED CLOSED
8 CLOSED CLOSED CLOSED
SAFETY DELAY TIMER
Time SW8 SW9
5 Sec ( Default ) OPEN OPEN
30 Sec CLOSED OPEN
60 Sec OPEN CLOSED
90 Sec CLOSED CLOSED
The safety delay timer allows the unit to keep the relay active during
periods of high interference or bad reception. This is the amount of time
that a signal must be lost before turning off the relay. This also is a
safety feature to turn off the relay if the
“relay off” code is missed due to
bad signal.
SPECIFICATIONS
Power Supply 9-36 VDC, 5 W
Fuse Protected 2 amp
Relay Contacts SPDT 5 amp @ 120VAC or 30VDC
Receiver Range
Up to 1 Mile (Up to 10 miles with
external antenna - see accessories)
Note: Max range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter
and receiver, height of transmitting antenna, height of receiving antenna, weather conditions,
interference sources in the area, and terrain between receiver and transmitter, including, but
not limited to, indoor and outdoor structures such as walls, metal objects, trees, buildings,
hills, and mountains
Receiver Frequency 900MHz Spread Spectrum
RF Networks Eight Independent Network Frequencies
Enclosure Polycarbonate, NEMA 4, IP66
Operating Temp -40
o
F - +185
o
F
DIMENSIONS
ACCESSORIES
Standard Antenna (Included):
900MHz TNC
“Rubber Duck” Antenna
49-1103
High Gain Antennas
–
Used to help achieve max range in both non line of sight and line
of sight applications. - Contact BWI Eagle for recommendations
900MHz Thru-Hole Mount Omni Directional Antenna 49-2101
900MHz Magnet Mount Omni Directional Antenna 49-2102
900MHz Omni Directional Antenna 49-3101
900MHz Yagi Antenna 49-3102
High Quality Coax Cables
–
Used to connect external high gain antennas to control unit
Flex Coax Cable w/Connectors
– Available
in 5
’,15’,25’,30’,40’,60’,80’,100’ Lengths
49-4000-XX
(XX = # of Feet)
Bulkhead Extensions
–
Used to provide an external antenna connection when mounting
control unit inside another enclosure
TNC Male to TNC Bulkhead Cable Assembly
-
Available in 2’, 4’, 7’ Lengths
49-5004-X-ISO
(X = # of Feet)
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and
installed, will be free from defects in material and workmanship for a period of
1 year after
date of purchase. Said warranty to include the repair or replacement of defective equipment.
This warranty does not cover damage due to external causes, including accident, problems
with electrical power, usage not in accordance with product instructions, misuse, neglect,
alteration, repair, improper installation, or improper testing. This limited warranty, and any
implied warranties that may exist under state law, apply only to the original purchaser of the
equipment, and last only for as long as such purchaser continues to own the equipment.
This warranty replaces all other warranties, express or implied including, but not limited to,
the implied warranties or merchantability and fitness for a particular purpose. BWI Eagle
makes no express warranties beyond those stated here. BWI disclaims without limitation,
implied warranties of merchantability and fitness for a particular purpose. Some jurisdictions
do not allow the exclusion of implied warranties so this limitation may not apply to you. To
obtain warranty service, contact BWI Eagle for a return material authorization. When
returning equipment to BWI Eagle, the customer assumes the risk of damage or loss during
shipping and is responsible for the shipping costs incurred.
DOCUMENT DATE: 4/23/2019 / PRODUCT REV. 7