PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
XLT PLUS
High Power 900MHz RF Receiver
MODEL 461-5000-DC
DESCRIPTION
The A
IR
-E
AGLE
XLT
P
LUS
is an RF system designed for long range
wireless remote control of electrical apparatus in a variety of industrial
applications. Systems can consist of any number of receivers and
handheld or contact input transmitters working together.
The “461” series
of receivers feature built-in repeating capability. They will listen for all
transmissions from the control transmitter, perform commands if
necessary and pass all commands on to any receiver within range. This
receiver is equipped with 3 independent relays, capable of switching 5
amps @ 120VAC or 30VDC, which can be directly interfaced with the
customer's equipment or P.L.C. Eight user selectable frequencies allow
multiple systems to be used in the same area. The Air-Eagle XLT Plus
can receive remote signals transmitted from up to 5000 feet away (with a
handheld transmitter) or up to 10 miles away (with a stationary transmitter
and external high gain antennas.
APPROVALS
United States (FCC)
MCQ-XBPSX
Canada (IC)
1846A-XBPSX
INSTALLATION
1.
Mount the A
IR
-E
AGLE
XLT PLUS RECEIVER
IN
a convenient
location.
2.
Install relay control wiring to the terminal strip.
3.
Attach rubber duck antenna or coax from external antenna to
connector on side of enclosure.
4.
Connect supplied power input cable to your external power source.
TERMINAL STRIP WIRING (TER1)
Terminal 1
Negative (-) 9-36VDC
Terminal 2
Positive (+) 9-36VDC
Terminal 3
Not Used
Terminal 4
Not Used
Terminal 5
Not Used
Terminal 6
Not Used
Terminal 7
Not Used
Terminal 8
Not Used
Terminal 9
N/O Relay 1
Terminal 10
C Relay 1
Terminal 11
N/C Relay 1
Terminal 12
N/O Relay 2
Terminal 13
C Relay 2
Terminal 14
N/C Relay 2
Terminal 15
N/O Relay 3
Terminal 16
C Relay 3
Terminal 17
N/C Relay 3
Terminal 18
Not Used
CONTROLS & INDICATORS
POWER/TX
LED1
Dual color LED. Illuminates red while receiver is
booting up; changes to green when boot-up is
successful and unit is ready to operate. If this LED
fails to turn green, power unit off for 15-20
seconds, then reapply power.
LED2
Illuminates green while relay 1 is energized
LED3
Illuminates green while relay 2 is energized
LED4
Illuminates green while relay 3 is energized
REL1, REL2, REL3
Three SPDT output control relays
RF1
RF Module that transmits/receives data
Summary of Contents for AIR-EAGLE XLT PLUS 461-5000-DC
Page 3: ......
