BWI Eagle AIR-EAGLE XLT PLUS 461-5000-AC, Product Information Bulletin

Page: 2 / 3

AIR-EAGLE
®
XLT PLUS
High Power 900MHz RF Receiver
MODEL 461-5000-AC
RELAY OPERATION
Relays energize and de-energize based on commands received from the
transmitter. See table below for relay mode configuration for this receiver:
TX Signal Received Relay Function
Input 1 Closed Relay 1 energizes, maintained momentary
Input 2 Closed Relay 2 energizes, maintained momentary
Input 3 Closed Relay 3 energizes, maintained momentary
FREQUENCY & OPTIONS SET-UP
This unit is shipped from the factory with SEL1 switches in the open
positions. The safety off-delay on all relays is 5 seconds and the unit is
operating on frequency #1. If you wish to change the default setting, follow
the instructions below:
1) Remove power from unit and remove top cover.
2) Select desired safety off-delay time and network frequency using
table below.
3) Reattach cover and apply power. Programming is now complete.
FREQUENCY SELECTION
SEL 1
(SW1, 2 &3):
Network
Frequency
SW1 SW2 SW3
#1
(default)
OPEN OPEN OPEN
#2 CLOSED OPEN OPEN
#3 OPEN CLOSED OPEN
#4 CLOSED CLOSED OPEN
#5 OPEN OPEN CLOSED
#6 CLOSED OPEN CLOSED
#7 OPEN CLOSED CLOSED
#8 CLOSED CLOSED CLOSED
SAFETY OFF-DELAY SELECTION
SEL 1
(SW4 & 5):
Off-Delay SW4 SW5
5 Seconds (default) OPEN OPEN
30 Seconds CLOSED OPEN
1 Minute OPEN CLOSED
1 ½ Minutes CLOSED CLOSED
SEL1
(SW6-7)
Not used on this model
SPECIFICATIONS
Power Supply 100-250 VAC, 5 W, 50/60 Hz
Fuse Protected 2 amp
Relay Contacts SPDT 5 amp @ 120VAC or 30VDC
Receiver Range
Up to 1 Mile (Up to 10 miles with
external antenna - see accessories)
Note: Max range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter
and receiver, height of transmitting antenna, height of receiving antenna, weather conditions,
interference sources in the area, and terrain between receiver and transmitter, including, but
not limited to, indoor and outdoor structures such as walls, metal objects, trees, buildings,
hills, and mountains
Receiver Frequency 900MHz Spread Spectrum
RF Networks Eight Independent Network Frequencies
Enclosure Polycarbonate, NEMA 4, IP66
Operating Temp -40
o
F - +185
o
F
DIMENSIONS
ACCESSORIES
Standard Antenna (Included):
900MHz TNC
“Rubber Duck” Antenna
49-1103
High Gain Antennas
–
Used to help achieve max range in both non line of sight and line
of sight applications. - Contact BWI Eagle for recommendations
900MHz Thru-Hole Mount Omni Directional Antenna 49-2101
900MHz Magnet Mount Omni Directional Antenna 49-2102
900MHz Omni Directional Antenna 49-3101
900MHz Yagi Antenna 49-3102
High Quality Coax Cables
–
Used to connect external high gain antennas to control unit
Flex Coax Cable w/Connectors
– Available
in 5
’,15’,25’,30’,40’,60’,80’,100’ Lengths
49-4000-XX
(XX = # of Feet)
Bulkhead Extensions
–
Used to provide an external antenna connection when mounting
control unit inside another enclosure
TNC Male to TNC Bulkhead Cable Assembly
-
Available in 2’, 4’, 7’ Lengths
49-5004-X-ISO
(X = # of Feet)
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be
free from defects in material and workmanship for a period of
1 year after date of purchase. Said
warranty to include the repair or replacement of defective equipment. This warranty does not cover
damage due to external causes, including accident, problems with electrical power, usage not in
accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or
improper testing. This limited warranty, and any implied warranties that may exist under state law,
apply only to the original purchaser of the equipment, and last only for as long as such purchaser
continues to own the equipment. This warranty replaces all other warranties, express or implied
including, but not limited to, the implied warranties or merchantability and fitness for a particular
purpose. BWI Eagle makes no express warranties beyond those stated here. BWI disclaims without
limitation, implied warranties of merchantability and fitness for a particular purpose. Some
jurisdictions do not allow the exclusion of implied warranties so this limitation may not apply to you.
To obtain warranty service, contact BWI Eagle for a return material authorization. When returning
equipment to BWI Eagle, the customer assumes the risk of damage or loss during shipping and is
responsible for the shipping costs incurred.
DOCUMENT DATE: 3/12/2021 / PRODUCT REV. 7