BWI Eagle AIR-EAGLE XLT PLUS 461-20800-DC, Product Information Bulletin, Page: 2 / 4

AIR-EAGLE
®
XLT PLUS
900MHz RF Receiver
MODEL 461-20800-DC
RELAY & FREQUENCY SET-UP
This unit is shipped from the factory with the SEL1 switches in the open
positions. All eight relays will operate in a maintained momentary manor,
and unit is receiving commands on frequency one. If you wish to change
these default settings, follow the instructions on the table below.
1) Remove power from unit
2) Remove top cover.
3) Select desired relay operation and/or network frequency using table
below.
4) Reattach cover and apply power.
5) Programming is now complete.
RELAY CONFIGURATION
SEL1
SWITCH
NUMBER
OPEN CLOSED
SW1
Relays #1 thru #8 maintained
momentary
(default)
Relays #1 thru #8
toggle/latch
SW2 Not used on this model
Maintained Momentary
– Relay mimics button or input – when
depressed or closed, relay will be energized; when released, relay de-
energizes
Toggle Latch
– Relay changes (and holds) its state each time the
corresponding button or input is depressed or closed.
SW3
Vibrating Feedback OFF
(default)
Vibrating Feedback ON
SW4 Not used on this model
FREQUENCY SET-UP
SEL1
(SW5-7)
Network
Frequency
SW5 SW6 SW7
1 (default) OPEN OPEN OPEN
2 CLOSED OPEN OPEN
3 OPEN CLOSED OPEN
4 CLOSED CLOSED OPEN
5 OPEN OPEN CLOSED
6 CLOSED OPEN CLOSED
7 OPEN CLOSED CLOSED
8 CLOSED CLOSED CLOSED
GENERAL OPERATION
Relays #1 thru #8 energize or de-energize based on specific
commands from a handheld or contact input transmitter.
BUTTON OR
INPUT
ACTIVATED
RELAY OPERATION
"1" Relay #1 energizes, maintained momentary
"2" Relay #2 energizes, maintained momentary
"3" Relay #3 energizes, maintained momentary
"4" Relay #4 energizes, maintained momentary
“5”
Relay #5 energizes, maintained momentary
“6”
Relay #6 energizes, maintained momentary
“7”
Relay #7 energizes, maintained momentary
“8”
Relay #8 energizes, maintained momentary
DIMENSIONS
APPROVALS
United States (FCC) OUR-9XTEND
Canada (IC) 4214A-9XTEND
SPECIFICATIONS
DC Input 9 - 36 VDC @ 10 Watts
Fuse Protected 2 amp
Relay Contacts SPDT 5 amp @ 120VAC or 30VDC
Receiver Range
Up to 1 Mile with Rubber Duck Antenna / Up
to 10 Miles with External Antenna
Note: Max range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter and
receiver, height of transmitting antenna, height of receiving antenna, weather conditions,
interference sources in the area, and terrain between receiver and transmitter, including, but not
limited to, indoor and outdoor structures such as walls, metal objects, trees, buildings, hills, and
mountains
Receiver Frequency 900 MHz Spread Spectrum
RF Networks Eight Independent Network Frequencies
Enclosure
Hinged fiberglass with window / NEMA 3,
3R, 4, 12, 13
Operating Temp
-40
o
F to +185
o
F