BWI Eagle AIR-EAGLE XLT 441-8000-R1NC-DC, Product Information Bulletin

Page: 2 / 3

AIR-EAGLE
®
XLT
900 MHz RF Receiver
MODEL 441-8000-R1NC-DC
RELAY & FREQUENCY SET-UP
The unit is shipped from the factory with SEL1 switches in the open
positions. All four relays will operate as maintained momentary and unit is
receiving commands on frequency one. If you wish to change these
default settings, follow the instructions on the table below.
1) Remove power from unit
2) Remove top cover.
3) Select desired relay operation and/or network frequency using table
below.
4) Reattach cover and apply power.
5) Programming is now complete.
RELAY CONFIGURATION
SEL1
SWITCH
NUMBER
OPEN CLOSED
SW1 Relay #1 momentary (default) Relay #1 toggle/latch
SW2 Relay #2 momentary (default) Relay #2 toggle/latch
SW3 Relay #3 momentary (default) Relay #3 toggle/latch
SW4 Relay #4 momentary (default) Relay #4 toggle/latch
Maintained Momentary
– Relay mimics button or input – when
depressed or closed, relay will be energized; when released, relay de-
energizes
Toggle Latch
– Relay changes (and holds) its state each time the
corresponding button or input is depressed or closed.
FREQUENCY SET-UP
SEL1
(SW5-7)
Network
Frequency
SW5 SW6 SW7
1 (default) OPEN OPEN OPEN
2 CLOSED OPEN OPEN
3 OPEN CLOSED OPEN
4 CLOSED CLOSED OPEN
5 OPEN OPEN CLOSED
6 CLOSED OPEN CLOSED
7 OPEN CLOSED CLOSED
SPECIFICATIONS
DC Input 9-36VDC @ 10 WATTS
Relay Contacts
SPDT 5 amp @ 120VAC or 30VDC per
channel
Fuse Protected 1 amp
Receiver Range Up to 2500 feet w/standard antenna
Note: Max range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter and
receiver, height of transmitting antenna, height of receiving antenna, weather conditions,
interference sources in the area, and terrain between receiver and transmitter, including, but not
limited to, indoor and outdoor structures such as walls, metal objects, trees, buildings, hills, and
mountains
Receiver Frequency 900 MHz Spread Spectrum
Receiver Channels Seven independent network frequencies
Operating Temperature -40
o
F to +185
o
F
Enclosure Polycarbonate, IP66 (NEMA 4)
Weight Approx 2 lbs.
ACCESSORIES
Standard Antenna (Included):
900MHz TNC
“Rubber Duck” Antenna
49-1103
High Gain Antennas
–
Used to help achieve max range in both non line of sight and line
of sight applications. - Contact BWI Eagle for recommendations
900MHx Thru-Hole Mount Omni Directional Antenna 49-2101
900MHz Magnet Mount Omni Directional Antenna 49-2102
900MHz Omni Directional Antenna 49-3101
900MHz 13dB Yagi Antenna 49-3102
High Quality Coax Cables
–
Used to connect external high gain antennas to control unit
Flex Coax Cable w/Connectors
– Available
in 5
’,15’,25’,30’,40’,60’,80’,100’ Lengths
49-4000-XX
(XX = # of Feet)
Bulkhead Extensions
–
Used to provide an external antenna connection when mounting
control unit inside another enclosure
TNC Male to TNC Bulkhead Cable Assembly
-
Available in 2’, 4’, 7’ Lengths
49-5004-X-ISO
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly
used and installed, will be free from defects in material and workmanship
for a period of 1 year after date of purchase. Said warranty to include the
repair or replacement of defective equipment. This warranty does not
cover damage due to external causes, including accident, problems with
electrical power, usage not in accordance with product instructions,
misuse, neglect, alteration, repair, improper installation, or improper
testing. This limited warranty, and any implied warranties that may exist
under state law, apply only to the original purchaser of the equipment, and
last only for as long as such purchaser continues to own the equipment.
This warranty replaces all other warranties, express or implied including,
but not limited to, the implied warranties or merchantability and fitness for
a particular purpose. BWI Eagle makes no express warranties beyond
those stated here. BWI disclaims without limitation, implied warranties of
merchantability and fitness for a particular purpose. Some jurisdictions do
not allow the exclusion of implied warranties so this limitation may not
apply to you. To obtain warranty service, contact BWI Eagle for a return
material authorization. When returning equipment to BWI Eagle, the
customer assumes the risk of damage or loss during shipping and is
responsible for the shipping costs incurred.
DOCUMENT DATE: 12/16/2020 / PRODUCT REV. 5
105 Bonnie Drive
Butler, PA 16002
(724) 283-4681
Fax (724) 283-5939
www.bwieagle.com