PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
SR PLUS
2.4 GHz RF Transmitter
MODEL 36-HH-4-VBR
DESCRIPTION
The A
IR
-E
AGLE
SR
PLUS
TX
I
s a handheld R.F. transmitter capable of
sending up to four unique digital commands to an Air-Eagle SR
Receiver located up to 600 feet away. This model is equipped with a
vibrating feedback that confirms to the user that the transmitted signal
has reached the receiver. Any number of transmitters and receivers
can be combined to create a medium-range radio frequency system
that operates hazardous or hard-to-reach equipment from safe,
convenient locations. Eight user-programmable frequencies allow
multiple systems to operate simultaneously in the same area without
interference.
This transmitter will automatically go into “sleep” mode
when no buttons are being depressed on the unit to dramatically
extend battery life.
INITIAL OPERATION SET-UP
This transmitter comes factory set to frequency 1 and power level 4 (max
range of 600 feet). If you wish to change the default settings, follow the
instructions for FREQUENCY PROGRAMMING AND POWER LEVEL
PROGRAMMING on page 2.
SPECIFICATIONS
Keypad
Durable Sealed Membrane Keypad
–
Eliminates Dust, Dirt and Moisture
Failures
Enclosure
ABS UL94 HB
Enclosure with
ring is rated IP54
*Not Waterproof
Protective Ring
SEBS (TPE)
Power Requirements
3.0 VDC
Battery Type
(2) 1.5V lithium each, size AAA, to
equal 3.0VDC nominal. ***For best
performance use ONLY Energizer
Brand Lithium Batteries
Battery Life
(Active Usage)
Up to 6 months
Battery Life
(Sleep Mode)
Up to 1 Year
Transmit Frequency
2.4GHz Spread Spectrum
RF Networks
Eight Independent Frequencies
RF Output Power
User Selectable from 1mW - 60 mW
Max Transmit Range
User-Selectable from 100 - 600 Feet
Note: Range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of
transmitter and receiver, height of transmitting antenna, height of receiving antenna,
weather conditions, interference sources in the area, and terrain between receiver and
transmitter, including, but not limited to, indoor and outdoor structures such as walls,
metal objects, trees, buildings, hills, and mountains.
Operating Temperature
-40
o
F to +185
o
F
Weight
Approx .22 lbs. (w/belt clip)
Dimensions
– 4.25” L x 2.68” W x .91” D
(note: belt clip adds .43” to depth)
CONTROLS & INDICATORS
TX LED
LED illuminates “
RED
” continuously while button is
depressed and unit is transmitting. When this LED blinks
briefly following a transmission, the battery needs to be
replaced.
See Note #1
Note #1
– The low battery notification signals have been improved to
provide more noticeable indications and to safely disable
communications BEFORE a low battery condition can corrupt internal
memory causing device failure. When a low battery is first detected,
the TX LED will blink several times after all buttons are released. If it is
possible to replace the batteries now, please do so. If not, the operator
has approximately 15 more button activations. During this time, when
a button is depressed and held, the TX LED will blink SLOWLY. The
slow blinking will continue several more times after all buttons are
released. Transmissions are still being sent to the receiver during this
time. When a button is depressed and the TX LED is RAPIDLY
blinking, the RF output is disabled and NO signal will reach the
receiver. The batteries MUST NOW BE REPLACED to resume
normal functions.
Pushbuttons 1 thru 4
Transmits individual button RF codes to the
receiver
Vibrate Alert
Vibration confirming that signal has been
transmitted successfully
APPROVALS
United States (FCC)
MCQ-XBEE3
Canada (IC)
1846A-XBEE3
Europe (CE)
ETSI
