PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
SR
2.4 GHz RF Receiver
MODEL 38-2000-VBR-DC
DESCRIPTION
The A
IR
-E
AGLE
SR
is an RF system designed for short to medium range
wireless remote control of electrical apparatus in a variety of industrial
applications. Systems can consist of any number of receivers and
handheld or contact input transmitters working together. This receiver is
equipped with 4 independent relays that can switch 5 amps @ 120VAC or
30VDC. The relays are user programmable for momentary or
toggle/latching operation and can be directly interfaced with the
customer's equipment or P.L.C. Eight user selectable frequencies allow
multiple systems to be used in the same area. Capable of receiving
remote signals transmitted from up to 600 feet away, the Air-Eagle SR
Receiver utilizes spread-spectrum technology and provides the utmost in
security and reliability.
MODEL NOTES
This receiver was designed specifically to communicate w
ith the “36”
series “VBR” transmitters and features a confirmation signal that is sent
back to the transmitter causing it to vibrate when its transmission has
been received.
INSTALLATION
1.
Mount the A
IR
-E
AGLE
XLT PLUS RECEIVER
IN
a convenient
location.
2.
Install relay control wiring to the terminal strip.
3.
Attach rubber duck antenna or coax from external antenna to
connector on side of enclosure.
4.
Connect supplied power input cable to your external power source.
TERMINAL STRIP WIRING (TER1)
Terminal 1
Negative (-) 9-36VDC
Terminal 2
Positive (+) 9-36VDC
Terminal 3
CH1 Dry Contact Input (Common)
Not used on
this model
Terminal 4
CH1 Dry Contact Input
Terminal 5
CH2 Dry Contact Input (Common)
Terminal 6
CH2 Dry Contact Input
Terminal 7
N/O Relay 1
Terminal 8
C Relay 1
Terminal 9
N/C Relay 1
Terminal 10
N/O Relay 2
Terminal 11
C Relay 2
Terminal 12
N/C Relay 2
Terminal 13
N/O Relay 3
Terminal 14
C Relay 3
Terminal 15
N/C Relay 3
Terminal 16
N/O Relay 4
Terminal 17
C Relay 4
Terminal 18
N/C Relay 4
CONTROLS & INDICATORS
POWER/TX
LED1
Dual color LED. Illuminates red while receiver is
booting up; changes to green when boot-up is
successful and unit is ready to operate. If this LED
fails to turn green, power unit off for 15-20
seconds, then reapply power.
LED2
Illuminates green while relay 1 is energized
LED3
Illuminates green while relay 2 is energized
LED4
Illuminates green while relay 3 is energized
LED5
Illuminates green while relay 4 is energized
REL1
– REL4
Four SPDT output control relays
RF1
RF Module that transmits/receives data
Summary of Contents for AIR-EAGLE SR 38-2000-VBR-DC
Page 3: ......
