BWI Eagle AIR-EAGLE 38-2000-R1NC, Product Information Bulletin

Page: 2 / 4

AIR-EAGLE
®
SR
2.4 GHz RF Receiver
MODEL 38-2000-R1NC
RELAY & FREQUENCY SET-UP
The unit is shipped from the factory with SEL1 switches in the open
positions. All four relays will operate as maintained momentary and unit is
receiving commands on frequency one. If you wish to change these
default settings, follow the instructions on the table below.
1) Remove power from unit
2) Remove top cover.
3) Select desired relay operation and/or network frequency using table
below.
4) Reattach cover and apply power.
5) Programming is now complete.
RELAY CONFIGURATION
SEL1
SWITCH
NUMBER
OPEN CLOSED
SW1 Relay #1 momentary (default) Relay #1 toggle/latch
SW2 Relay #2 momentary (default) Relay #2 toggle/latch
SW3 Relay #3 momentary (default) Relay #3 toggle/latch
SW4 Relay #4 momentary (default) Relay #4 toggle/latch
Maintained Momentary
– Relay mimics button or input – when
depressed or closed, relay will be energized; when released, relay de-
energizes
Toggle Latch
– Relay changes (and holds) its state each time the
corresponding button or input is depressed or closed.
FREQUENCY SET-UP
SEL1
(SW5-7)
Network
Frequency
SW5 SW6 SW7
1 (default) OPEN OPEN OPEN
2 CLOSED OPEN OPEN
3 OPEN CLOSED OPEN
4 CLOSED CLOSED OPEN
5 OPEN OPEN CLOSED
6 CLOSED OPEN CLOSED
7 OPEN CLOSED CLOSED
8 CLOSED CLOSED CLOSED
SPECIFICATIONS
AC Input 120 VAC, 16 W, 50/60 Hz
Relay Contacts SPDT 5 amp @ 120VAC or 30VDC
Fuse Protected 1 amp
Receiver Frequency 2.4 GHz Spread Spectrum
Receiver Range Up to 600 Feet
Note: Range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter
and receiver, height of transmitting antenna, height of receiving antenna, weather
conditions, interference sources in the area, and terrain between receiver and transmitter,
including, but not limited to, indoor and outdoor structures such as walls, metal objects,
trees, buildings, hills, and mountains.
Receiver Channels Eight independent network frequencies
Operating Temperature -40
o
F to +185
o
F
Enclosure
Polycarbonate, IP66 (NEMA 4)
Weight Approx 2 lbs.
DIMENSIONS
ACCESSORIES
Standard Antenna (Included):
2.4GHz TNC
“Rubber Duck” Antenna
49-1201
High Gain Antennas
–
Used to help achieve max range in both non line of sight and line
of sight applications. - Contact BWI Eagle for recommendations
2.4GHz Thru-Hole Mount Omni Directional Antenna 49-2201
2.4GHz Magnet Mount Omni Directional Antenna 49-2202
2.4GHz Omni Directional Antenna 49-3201
2.4GHz Yagi Antenna 49-3202
High Quality Coax Cables
–
Used to connect external high gain antennas to control unit
Flex Coax Cable w/Connectors
– Available
in 5’,15’,25’,30’,40’,60’,80’,100’ Lengths
49-4000-XX
(XX = # of Feet)
Bulkhead Extensions
–
Used to provide an external antenna connection when mounting
control unit inside another enclosure
TNC Male to TNC Bulkhead Cable Assembly
-
Available in 2’, 4’, 7’ Lengths
49-5004-X-ISO
(X = # of Feet)