GasAlertMicro
User Options Menu
11
User Options Menu
To access the user options, press
G
and
H
simultaneously.
To choose the desired option, press
H
or
G
. Press
C
to
select the option. The following are the available user options:
•
Finish options: exits the user options menu;
•
Latching alarms: alarm persists until the user
acknowledges it;
•
Safe display: LCD displays
SAFE
when no gas is
measured;
•
Combustible sensor measuring selection: measures and
displays in either 0-100% LEL or 0-5.0% vol.;
•
Language selection: LCD displays in English, French,
German, Spanish, or Portuguese;
•
Sensor option: enable/disable a sensor;
•
Pass code protection: prevents access to the user
options menu and the calibration menu;
•
Automatic oxygen calibration: enables oxygen calibration
at startup;
•
Span concentration values: change each sensor’s span
concentration value for calibration;
•
STEL period: set the STEL calculation period between
5-15 minutes;
•
Stealth mode: disables the audible and visual alarms;
•
Automatic backlight: disables the automatic backlight
regardless of the lighting situation;
•
MicroBatt: acknowledges that the detector is using the
GA MicroBatt;
•
Bump due: enables a note to display upon startup if the
detector has not been bumped within the last 24 hours;
•
Adjust clock: adjusts the real-time clock and calendar
(datalogger model only);
•
Logger rate: adjust the rate between 1-127 seconds
(datalogger model only).
Note
To quickly scroll through the options press and hold
H
or
G
.
