Rig Rat III Controller
Safety Information - Read First
a
Cautions
⇒
Do not use the controller if it or any system components are damaged. Inspect the system on a regular basis
and keep a log.
⇒
If the controller is damaged or something is missing, contact
immediately.
⇒
When installing cables, ensure they are protected from possible damage. Secure the cable(s) in place and fasten
any excess. Do not exceed a 65-degree bend allowance when installing the cables.
⇒
Ensure that all plug-in connectors are clean and fully seated when installing them.
⇒
Confirm that the weatherproof ring on the connector(s) is fully screwed down.
⇒
Confirm that all ports not in use are fully screwed down and have cover caps installed.
⇒
Ensure that the latch on the external hinged door is fully engaged and that the handle has been turned the full 180
degrees to complete the weather seal.
⇒
Do not expose the unit to electrical shock and/or severe mechanical shock.
⇒
Use only parts specifically designed for the Rig Rat III Controller system. See the section
.
⇒
Do not allow liquids to condense and/or use high power sprays on the instruments.
⇒
Do not attach system components that do not meet specified criteria (such as alarms, relays, cabling, etc.).
3
