Bewis Sensing Technology LLC www.bwsensing.com Tel: +89 18921292620
BW-IMU100
Low-cost Inertial Measurement Unit
You can download the serial debugging assistant directly on the official website
(technical service -> download area), or you can use the more convenient and intuitive host
computer software.
BW-IMU100 supporting serial port debugging software can connect the inclination
sensor on the computer to display the angle. The software debugging interface is shown in
the figure below. Using the tilt angle to debug the host computer, you can easily display the
current X and Y directions, and you can also modify and set other parameters.
Steps for use
：
①
Connect the serial port hardware of the inclinometer correctly, and connect the power
supply.
②
Select computer serial port and baud rate and click connect serial port.
③
Click start button and the current inclination angle of the incliner in X and Y directions
will be displayed on the screen.
Debugging software
