Remote Control Application
51
The dayparts can be layered so that one can override another. Let's say the default preset was U1:MAIN
PRESET and this was on the air all of the time. We want to change the preset from 7AM to 10AM every day of
the week to F2:CHR and then from 10AM to 12PM we want U4:NEW PRESET and then back to F2:CHR until
5PM.
Rather than setup the dayparts as
DPO: F2:CHR - ALL 07:00 - 03:00
(factory preset 2 to run from 7am everyday for 3 hours)
DP1: U4:NEW PRESET - ALL 10:00 - 02:00
(user preset 4 to run from 10am everyday for 2 hours)
DP2: F2:CHR - ALL 12:00 - 05:00
(factory preset 2 to run from 12pm everyday for 5 hours)
We could instead setup the dayparts as
DPO: F2:CHR - ALL 07:00 - 10:00
(factory preset 2 to run from 7am everyday for 10 hours)
DP1: U4:NEW PRESET - ALL 10:00 - 02:00
(user preset 4 to run from 10am everyday for 2 hours)
which saves a daypart position.
By carefully selecting the default preset and overlaying dayparts we are able switch presets significantly more
than you first think you will be able to.
A/B COMPARISON FEATURE
The Remote application has two buttons labelled A and B that are located just below the connection button.
These buttons allow you to compare changes you have made to the processing against the saved preset. When
you load a preset the buttons should be greyed out but as soon as you make any processing changes these but-
tons will become active. By selecting the B button you can temporarily revert back to the saved preset. During
this time all the processing controls will grey out to indicate you are in a compare mode. To return to the settings
that you have been adjusting click the A button and the processing controls will ‘un-grey’ If at any time you want
to revert to the saved preset and lose your adjustement just reload the preset from the preset selection window.
The A/B feature makes it easy to build up your own presets by being able to easily compare before and after
processing adjustements. We hope you find it useful.
Summary of Contents for DSPXtra-FM
Page 63: ...www bwbroadcast com...
