YAK 130
BVM ©2016 7 Mar. 23, 2016
Joining the Aft Fuse to the Forward Fuse 4 Pin System
See next page for 6 Pin System.
Sequence:
Test join the 2 fuse sections.
Then separate the aft and forward sections.
Install the Inlet Ducts.
Then join the aft and forward fuse sections.
Access the bag with the (4) fuse aluminum
pins and remove the 3mm SHCS from both
ends of the aluminum pins.
NOTE:
Post January 2016 production
models have (6) fuse aluminum pins.
Install (4) Aluminum Joiner Pins at the 12,
3, 6, and 9 o’clock positions of the Aft Fuse section.
Apply Z-42 to each 3mm x13mm, then install from the rear into the aluminum pins.
NOTE: A 3mm “L” Hex wrench works well.
Pin @ 12 o’clock
Pin @ 3 o’clock
Pin @ 6 o’clock
Pin @ 9 o’clock
