BVM ®2014 47 Printed 9/26/2019
Center of Gravity
Measure aft of the front/rear fuselage break
10.5”. Drill a 1/16” hole in the fuselage skin
1/4” inboard from the wing root and install a
#2 button head screw on each side. The
root of the fuselage also has the GC
location marked with a pen. This location
is very forgiving; there is no need to move
it forward. The second BVM demo plane is
set slightly aft per pilot’s choice.
Balance the model fully assembled, empty
fuel tanks, gear down, and a full UAT. With
the correct CG, the model should balance
level.
