9
Goal achieved: If you were supplied the Dairy Feeder System together
with a BvL feeder mixer wagon, then setup is complete. You can get
started right away. All the following settings were made in the factory.
2.
Connecting the Dairy Feeder system to the feeder mixer
wagon
If your feeder mixer wagon was delivered preinstalled together with a Dairy Feeder system, then
you do not need to carry out any installation work. Just skip this chapter.
If you acquired a Dairy Feeder system to be connected to your existing feeder mixer wagon, then
you have to install and calibrate the system. Take the steps described as follows.
2.1.
Connect the transceiver box
Connect the transceiver box to your weighing equipment by
connecting the box between the weighing bars and the
weighing computer.
To do this take the cable coming from the weighing bars out of
the weighing computer (not the power cord!) and connect it to
the Dairy Feeder transceiver box.
ON
ON
OFF
Leave the menu
by pressing the
small ‘
x’
in the
top right of the
menu list.
