CALEO SMART PANEL HEATER
12
13
ENG
ENG
Wall mounted Installation
1. Remove the bracket
It is recommended to place the heater face down, open the top lock with a screwdriver and
move the wall-mounted bracket down to remove it.
( 1 ) Pick the lock buckle of the bracket.
( 2 ) Push the bracket according to the direction
of the arrow.
( 3 ) Lift the bracket.
( 4 ) Extract and remove the bracket.
INSTALLATION INSTRUCTIONS
•
Before installing, check that all parts are complete and the product is intact.
•
If you want to use the electric heater freestanding, please fit with the feet provided with the
heater, following the instructions below. Make sure the heater is mounted on a level, stable
and clean surface.
Freestanding Installation
1. Put the product upside down on a soft cotton
cloth or carpet.
2.
Fix the feet to the base of the heater using the
screws provided. Line up the holes in the base
with the holes in feet, put the screws through
the holes and tighten with a screwdriver.
2. Fix the wall bracket
Mark the wall according to the dimensions given below for the heater models you pur
-
chased, drill the wall and insert the plastic wall anchors into the holes, mount the wall brack
-
et using the screws provided.
NOTES
Prior to drilling the wall, ensure there are no cables or pipes within the wall and
ensure that the mounting screws are fixed firmly to guarantee that the heater is
safely mounted to the wall.
3. Fix the heater
Tilting the heater so that the lower hole of the heater is aligned with the bracket P1 and
hooked. After hanging, rotate the heater until entering the bracket P2, descend the heater
downward and fasten the lock catch on the heater.
500W
1000W
1500W
2000W
A
218 mm
218 mm
218 mm
218 mm
B
218 mm
218 mm
218 mm
218 mm
C
130 mm
130 mm
291,5 mm
402 mm