BroadcastVision Entertainment Technical Support
Telephone: 1(888) 330-4283 ext.3 Email: [email protected]
Page 2
Your CAB is enabled for an application as follows:
Proposal Number:
Set Top Box:
Console Description:
SportsArt Senza
If your equipment differs from the information above, please call
BVE technical support
at
1(888)330-4283 ext.3
for instructions on how to reprogram the CAB onsite.
CAB CONFIGURATION
The CAB ships pre-configured by BVE for the target STB at customer facility. Normally,
no additional configuration steps are required.
If the CAB does not work for any
reason, please call technical support at 1(888)330-4283 ext.3 before leaving the
facility.
BVE’s technical support staff is happy to help troubleshoot issues to get the
CAB working properly.
The CAB contains 8 dip-switches internally. Normally these should all be in the OFF
position. To help solve specific deployment compatibility challenges, BVE Technical
Support may instruct that some of the switch positions be changed
– see the
Troubleshooting section at the end of this manual for common settings or call
Broadcastvision technical support for additional assistance.
Note:
The Broadcastvision CAB should always be installed after the cable/satellite
service has already been installed, and you have a picture on the screen. If the Set Top
Box (STB) is not available at the time of installation you can still run all of the wires and
hook up the CAB, but you will not be able to test the CAB to make sure that it is changing
channels on the STB.
