BroadcastVision Entertainment : www.broadcastvision.com
Tel (888) 330-4283, Email: [email protected]
Page 2
Installation Instructions:
1.
These mounts attach to the Life Fitness® Activate series cardio equipment at the
location of the 4 console bolts. Remove the 4 factory console bolts. On the OST
treadmill first remove the treadmill shroud being sure to retain all the shroud screws
for later installation.
Note there is an “exchange deposit” on the OST console
shroud to secure the return of the unmodified OST shroud to us. Please return the
unmodified shroud in the packaging the modified shroud shipped in to save costs
and waste. (Broadcastvision Entertainment, OST shroud, 619 8
th
Street, Berthoud,
CO 80513).
2.
Route the coax and power cable through the Activate frame as shown in picture B
below.
3.
Secure the mount using the 4 mounting holes. Install the black console spacers
(picture A) for the OSC, OSR, and OSX mounts. No spacers are used with the OST
mount. Note that new console mounting bolts are included with each mount. Do not
use the original console bolts. Be sure to use the lock-washer and washers included
with each bolt.
4.
Secure the LCD to the top of the mount using the LCD bolts provided with the LCD.
5.
Optional: Ideally the coax and power cable should be run through the cardio frame.
If that step is not taken, use the adhesive wire tie mounting pads, tie straps, and wire
loom included to accomplish cable management as shown in pictures C and D. THIS
IS AN IMPORTANT STEP TO ENSURE AN ATTRACTIVE, COMPLETE, SAFE
INSTALLATION.
