![background image](http://html1.mh-extra.com/html/buyers/snowdogg-series/snowdogg-series_owners-manual_2836078006.webp)
6
3020310 Rev C
CAUTION
Fold Down
Lift Arm And Secure
With Pin When Plow
Is Disconnected.
Lift Arm Storage
Level Lift Diagrams
9.0 Approx.
Ground Level
Lift Chains
Chain Banjo Eye
Inner Lift Arm
Center Of
King Pin
Lift Arm Hitch Pin
Ground Level
Fully Lifted Position
1.
Retract lift cylinder completely.
2.
Adjust inner lift arm to its shortest position.
3.
While supporting the lift arm and the lift cylinder, remove
the hitch pin that attaches the cylinder rod to the lift arm.
4.
Rotate the cylinder towards the hitch frame into its
stowed position & then rotate the lift arm downward.
5.
Secure the lift arm in the stowed position with the hitch
pin as shown.
Move Inner Lift Arm
To Shortest Position
Lift Cylinder
Hitch Pin
Retract Lift
Cylinder Completely
Remove Cylinder
Hitch Pin
Rotate Lift
Cylinder Upward
Rotate Lift Arm
Downward
Secure In Stored
Position With Hitch Pin
Adjusting The Plow And Hitch For Level Lift:
1.
On level ground, attach plow’s a-frame to the hitch.
2.
Adjust lift arm until it is all most 90° as shown.
3.
Remove the lift arm hitch pin and adjust the inner lift arm
until the chain attachment points are in-line with the cen-
ter of the king pin. Secure with the hitch pin.
4.
Attach lift chains to the lift arm so that when the lift arm is
fully lifted the cutting edge approximately 9” off the ground.
Quick Hitch Installation
Bill of Materials
ITEM
PART NO.
QTY.
DESCRIPTION
1
—
1
HITCH ASSEMBLY, QUICK HITCH
2-13
16340100
1
MOUNT KIT, MUNI FAB, BUMPER TO FRAME
2
16340102
1
ANGLE, MOUNT, HORIZONTAL
3
16340104
2
PLATE, FRAME MOUNT, SIDE
4
16340106
4
ANGLE, MOUNT, FRAME
5
16340108
4
PLATE, BRACE MOUNT, LOWER
6
16340110
2
BAR, BRACE
7
16340112
2
BAR, BRACE STIFFENER
8-13
16340114
1
HARDWARE BAG, BUMPER TO FRAME MOUNT
8
—
4
SCREW, HEX CAP, 1"-8 X 3-1/4, GR 5, ZN
9
—
4
WASHER, LOCK, 1", ZN
10
—
4
NUT, HEX, 1"-8, GR 5, ZN
11
—
12
SCREW, HEX CAP, 5/8-11 X 3, GR5, ZN
12
—
12
WASHER, LOCK, 5/8", ZN
13
—
12
NUT, HEX, 5/8-11, G5, ZN