Wheel Installation
1. With the transmission in gear and the parking brake locked, place the wheel in the
correct position on the wheel hub. Be sure the valve stem is toward the outside and
rotation arrows on the tire point toward rotation.
2. Attach the wheel nuts and finger
tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts
according to the chart found in
“
16. MAINTENANCE/Wheel Nut Torque
”.
Tire Inspection
When replacing a tire always use original equipment size and type.
Tire Tread Depth
Always replace tires when tread depth is worn to 1/8” (3 mm) (1) or less. Please refer
to your Owner’s Manual for tire specifications.
Create PDF with GO2PDF for free, if you wish to remove this line, click here to buy Virtual PDF Printer
