BUXTON REI-TW 200, User Manual

Page: 3 / 60

3 EN
Dimensions and weight of earbuds 23 x 15 x 24 mm, 4 g (each)
Dimensions of the charging station 75 x 41 x 34 mm, 44 g
Accessories Charging cable USB A - USB
type C
* The operating times listed above may vary depending on the
operating mode and the setting of the device.
Technical specifications may change without prior notice. The
playback time may vary depending on the volume and content
you set.
Charging
1. Insert both earbuds into the
charging station and close the lid.
Note: Ensure that both left and
right earbuds are correctly
positioned in the correct slot.
Each slot shall be marked with
the following letter: L for the left
earbud, R for the right earbud.
2. Use the supplied USB-C cable
to connect the connector to your
computer or to a USB charging adapter (5 V, 1 A or less).
3. Check the charging status of the charging station.
4. Check the charging status of the earbuds.
– If the light flashes red quickly, the battery status is low.
– If the indicator light is red, the headphones are being charged.
– If the light turns blue and goes off after about 5 seconds, the
headphones are fully charged.
Warning
Check that the charger is suitable for use with headphones and
a charging station.
Use only a charger suitable for charging the headphones. Using
other devices may compromise the validity or limit the warranty
conditions, and may create a dangerous situation.
Do not force open the headphones or charging station as this
may damage the headphones and station.