9
10
PT-TC02 Bark Collar
PT-TC02 Bark Collar
When the bark collar is off, press
and hold to turn it on, and
keep pressing for 5 seconds to
enter the pairing mode, the level
indicator will light flashes slowly.
Press the key and key of the
remote control at the same �me
for 3 seconds.The remote control
will transmit a pairing signal to the
bark collar, and the channel
number of the remote control will
flash 5 �mes quickly.
Pairing mode
Ba�ery and charging
1
2
3
4
A�er the pairing is done, the bark
collar will beeps “beep..beep” , and
the ba�ery level indicator lights will
be displayed one by one.
In the pairing mode, if the pairing is not finished within 30
seconds, the bark collar will automa�cally exit the pairing mode.
1
2
3
4
“beep..beep”
When the ba�ery level is low,
the low ba�ery and power icons
will flash once every 5 seconds.
A�er 10 minutes, the bark collar
will automa�cally turn off.
In the standby state of the bark
collar, press to check the
current ba�ery level.
During the charging, the bark
collar will stop working and
indicate the current charged
ba�ery level. Typically it takes
about 2 hours to fully charge.
When the ba�ery power is lower
t h a n l e v e l 2 , p l e a s e s t a r t
charging.
2hours
Keep holding until the
indicator light flashes