BUTURE BR800, User Manual

Page: 9 / 50

In any of the following situations,
the smart clamp turns protection on:
LED indicator Situations
The red/green
led will flash
Ready to work
The green
light is always on
Work status
The red
light is always on
The red light
flashes slowly
The red light LED
flashes quickly
1.battery clamp is reversely connected
----check whether the clip is reversely connected
2.the clamp is short-circuited
----check whether two clamps together connect
or connect both cable clamps to the same piece of metal
The temperature of the clamp exceeds 65±5 degrees
----remove the clamp until the red-green led flash
Connection timed out, please re-clip the clamps
The voltage of the starter is too low
----try to replace the startup power supply or charge
it in time
The green light
flashes slowly
Warnings:
1. When jump-starting a vehicle, please ensure that the blue plug is securely fitted into
the jump start socket on your jump starter
.
2. Do not allow this product in water
.
07