Butterfly B1501B/T, Operation And Service Manual

Page: 34 / 94

P a g e | 34
Butterfly B1501B/T - Single Head 15 Needle Embroidery Machine Manual
4.2.5 Centering and Tracing
You can center and then trace the design by performing the following.
1. On screen 4, use arrow buttons to move design to desired position in hoop.
2. Press the arrow button in the center to change movement speed.
3. Once in desired position, press yellow button with magnifying glass.
4. You can trace design using either one of two buttons
5. The trace button with a needle and dotted box will trace a box around the design giving you the
general area where the design will be.
6.
The trace button with a needle and dotted circle will trace around the edge of your design giving
you an exact area of where the design will be.
7.
Once traced, use the arrow buttons to move design to desired location.