Butterfly B1501B/T, Operation And Service Manual

Page: 15 / 94

P a g e | 15
Butterfly B1501B/T - Single Head 15 Needle Embroidery Machine Manual
2.4 S
ETTING UP THREAD RACK TREE
Assembly of the Thread Rack (also
known as the Threading Tree) – See Figure
2-5. The thread rack is the part of the
machine which includes the first set of
tension knobs. The primary function of
the thread rack is to smoothly unwind
thread off of the spool of thread.
Step 1 – Screw Thread Stand
Shafts (2 pcs) in by hand into threaded
holes A and B on the Thread Stand.
Step 2 – Tighten thread shafts
using the flat adjustor C on each shaft with
a wrench.
Step 3- Place the Thread Rack/Tree
onto thread stand shafts with the knobs of
the thread rack facing towards the head
(front most part of the machine)
Step 4 – Tighten Allen screws on
top of the thread rack.
Figure 2-5: Thread Rack