Inha Works Ltd. 2009
22 (31)
ATTENTION!
The trailer should be slightly front-weighted. Ensure that the
boat is firmly fastened to the trailer and that its weight is
evenly distributed along the trailer supports. During
transportation a swaying boat will buffet against the supports
and damage the hull.
WARNING!
In terms of carrying capacity, an inadequate or poorly
maintained trailer can break down during transportation and
be dangerous. Ensure the load capacity of the trailer is
sufficient for the weight of the boat, its engine, fuel, and all
equipment.
6 Service, repairs and winter storage
Information about maintenance, winter storage, service and repairs can be found on
the internet at http://www.busterboat.com or provided by your nearest Buster
dealership.
Major damage to the aluminium surface or other surfaces should always be repaired
by an authorised Buster dealership.
In the event of engine defects or faults in other devices, contact the supplier of the
device in question.
ATTENTION!
Surface treated fastening accessories are used in Buster L
boats to prevent paint damage due to galvanic corrosion. If
any of the screws are removed, they must be replaced with
new ones. Using screws other than surface-treated Buster
screws will immediately void the warranty.
ATTENTION!
If not properly carried out, many post-production installations
and alterations can cause structural damage to the boat or
compromise safety. Contact the manufacturer before you or
anyone else on your behalf carries out, for example, new
groundings, hatches, or equipment installations, or attaches
other metal alloys to the aluminium surface of the boat.
Summary of Contents for L
Page 29: ......
