ProDAQ 3202 Installation Instructions
Rev. 1.0
Page 10 of 12
19.
Attach the front bezel to the enclosure top and function card cover using the two M3x6mm countersunk
screws removed in step 1. Be careful to align the cut-outs for the power switch and LEDs correctly first:
Then attach the function cards again to the front bezel using the eight M2.5x6mm panhead screws removed
in step 1. The function cards are slightly flexible, so most likely the threaded holes of the connectors don
’
t
line up perfectly with the mounting holes in the front bezel. Don
’
t force the screws into the threads, position
the function cards correctly behind the front bezel first!
20.
Done: