11
FAULT
PROBABLE CAUSE
REPAIR
When switched on the machine
will not start working.
• Plug is not well connected or
electric socket is faulty.
• The main voltage is
insufficient, lower than
minimum requirement.
• The pump is stuck.
• Thermal safety switch has
tripped.
• Check plug, socket.
• Check that the main voltage
is adequate.
• Refer to after storage
instructions.
• Switch off the unit and let the
motor cool for a few minutes.
• Leave the lance open.
Fluctuating Pressure.
• Pump sucking air.
• Valves dirty, worn out or
stuck.
• Pump seals worn out.
• Check that hoses and
connections are airtight.
• Clean and replace, or refer to
dealer.
Water leaking from the pump.
• Seals worn out.
• Check and replace, or refer to
dealer.
The motor stops suddenly.
• Thermal safety switch has
activated due to the motor
overheating.
• Check that the main voltage
corresponds to specifications.
• Switch off the unit and let it
cool for a few minutes.
The pump doesn’t reach the
necessary pressure.
• Water inlet filter is clogged.
• Pump sucking air from
connections or hoses.
• Suction/ delivery valves are
clogged or worn.
• Unloaded valve is stuck.
• Lance nozzle incorrect or
worn.
• Clean the water inlet filter.
• Check that all supply
connections are tight.
• Check that the water feeding
hose is not leaking.
• Clear or replace valves.
• Loosen and re-tighten
regulation screw.
• Check and/or replace.
INSPECTION AND MAINTENANCE
For safety, make sure the machine is kept clean. Before working, make sure you inspect the filter and the nozzle, make
sure there is no impurity. After working, make sure there is no water in the pump and the hose. This is a good time to use
“pump saver”.
If the machine need to be repaired in the warranty period, please return the machine to your local BushRanger
TM
dealer. You
need to provide the certificate of purchase in order to repair or receive a replacement.
Before Packaging, The machine should be cleaned, then use closed packaging, packaging should be firm. Store the
machine in a dry area.
For transportation safety. The machine should comply with ISTA.
Do not dispose of electrical machines as unsorted municipal waste, use separate collection facilities.
Contact you local government for information regarding the collection systems available.
If electrical machines are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get
into the food chain, damaging your health and well-being.
43
1. Australian Consumer Law (REG. 90):
The benefits to the consumer given by this warranty are in addition to other rights and remedies of the consumer
under a law in relation to the good or services to which this warranty relates.
Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the good repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to major failure.
The text above applies notwithstanding anything else
expressed or implied to the contrary in this warranty document.
Powerup Lawn Care
a division of
Roy Gripske & Sons Pty. Ltd
11 Sodium St, Narangba QLD 4504
Telephone: 1300 363 027
Fax: 1800 332 213
Email: [email protected]
For more information please visit our website:
poweruplawncare.com.au
