![background image](http://html.mh-extra.com/html/bushranger/l2600/l2600_operators-manual_2835573013.webp)
13
OPERATIONS
Engine Starting and Stopping Procedures -
Starting a Cold Engine
1. Move the stop switch to
“START”
position. (Fig. 16).
2. Give a gentle push on the
primer bulb repeatedly (3 -
5 times) or until fuel comes
into the primer bulb.
(Fig. 17).
3. Cold Starts: Pull lever up
to close choke position.
(Fig. 18).
4. Pull starter handle until
engine starts or sounds like
it wants to start.
5. Push choke lever down to
choke open position
(excessive cranking
with choke lever closed will cause the engine
to flood making it difficult to start).
6. Pull starter handle until engine starts.
7. Allow engine to warm up for a short time
before using.
Starting Warm Engine
1.
If fuel tank was not run dry, pull the starter
one to three times and the engine should
start. Do not use choke.
2.
If fuel tank was run dry, after refilling repeat
steps 2 through to 7 in
STARTING COLD
ENGINE.
Stopping The Engine
• Move switch to
STOP
position. (Fig. 16B).
• Push forward to stop.
MAINTENANCE AND CARE
Air Filter
• Accumulated dust in the air filter will reduce
engine efficiency. Increase fuel consumption
and allow abrasive particles to pass into the
engine. Remove the air filter as often as
necessary to maintain in a clean condition
• Light surface dust can readily be removed by
tapping the filter. Heavy deposits should be
washed out in suitable
solvent.
• Remove filter cover
by loosening air filter
cover knob.
Adjusting Carburettor
NOTE
Do not adjust carburetor unless necessary.
If you have trouble with the carburetor, see your
local Bushranger
™
dealer. Improper adjustment
may cause engine damage and void warranty.
• Check the fuel filter periodically. Do not allow
dust to enter into fuel tank. Clogged filter
will cause difficulty in starting the engine or
abnormalities in engine performance.
• When filter is dirty, replace the filter.
• When the inside of the fuel tank is dirty, it
can be cleaned by rinsing the tank out with
gasoline.
Check Spark Plug
• Do not attempt to remove the plug from a hot
engine in order to avoid possible damage to
the threads.
Fig. 17
Fig. 16B
Summary of Contents for L2600
