- 10 -
2.
Move the choke lever to the closed position “ ”. When the
engine is warm, move the choke lever to the open position “ ”.
3.
Set the engine stop switch to the “ON ( | )” position. The throttle
trigger positioned at IDLE.
4.
Grasp the starter grip and slowly pull the starter cord out until you feel some resistance, then pull
the cord quickly and powerfully. Pull the starter grip until the engine starts. After the engine is
started, move the choke lever to the open position.
5.
After starting, allow the engine to run a few minutes to warm it up before using.
NOTE:
1.
Do not pull the starter cord out completely.
2.
Do not release the starter cord from the fully extended position.
3.
Do not start the engine without rear handle locked.
TO STOP THE ENGINE:
1.
Release the throttle trigger.
2.
Slide the stop switch to the “STOP ( O )” position.
STOP ( O ) ←→ ON ( | )
STOP SWITCH
CHOKE LEVER
CLOSE
OPEN