![background image](http://html.mh-extra.com/html/bushranger/85003/85003_operators-manual_2835613008.webp)
8
ASSEMBLY PROCEDURES
Trimmer Body & Hedge Trimmer Attachment
Gear Case
• The reduction gears are lubricated by multipurpose, lithium-based grease in th gear case. Supply new grease every 20
hours of use or more often depending on job condition.
• Remove the cutter holders before installing new grease to arrange for old grease to exit.
• Screwing in the screw too tightly may make it impossible for the blades to move.
Conversely, not screwing in the screw tightly enough may make the blades of the
trimmer feel dull and cause leaves and branches to become caught in the blades of
the trimmer.
• The reduction gears are lubricated by multipurpose, lithium-based grease in the gear
case. Supply new grease every 20 hours of use or more often depending on the job
condition. Refer to Fig. 10 for grease points.
Fig. 10
Summary of Contents for 85003
Page 1: ...1 OPERATOR S MANUAL MULTI TOOL HEDGE TRIMMER ATTACHMENT 85003 ...
Page 9: ...9 NOTES ...
Page 10: ...10 NOTES ...
Page 11: ...11 NOTES ...