CLEANING AND STORAGE
16
Fitting and removing the mulcher plug:
Fitting the plug
•
Stop the engine.
•
Make sure the discharge chute and
underside of the mower body is clean.
•
Lift the rear flap of the lawnmower and
remove the catcher, if fitted.
•
Grasp the Mulcher Plug by its handles
and insert into the rear of the lawnmower
ensuring it is positioned correctly.
•
Guide the mulcher plug in over the rear axle
and clip into position.
•
Lower the rear flap.
•
The lawnmower is now ready to use as a
mulcher
model.
Removing the plug:
•
Stop the engine.
•
Lift the rear flap of the lawnmower.
•
Grasp the Mulcher Plug by its handles and
lift clear of the rear axle of the lawnmower.
•
Guide the mulcher plug out over the rear
axle of the lawnmower.
•
Lower the rear flap or fit the catcher as
required.
Clean the underside of the mower body and mulcher plug
as necessary.
Summary of Contents for 500SF
Page 25: ...NOTES 25 ...
Page 26: ...NOTES 26 ...
Page 27: ...NOTES 27 ...
Page 28: ...www poweruplawncare com au Copyright Roy Gripske Sons Pty Ltd 2013 ...
