background image

DETAILED ASSEMBLY

Remove all components from the carton and identify all components. READ THROUGH ASSEMBLY
INSTRUCTION BEFORE YOU ASSEMBLE YOUR TELESCOPE.

Attach Telescope and Finderscope

1.

Locate the pre-assembled 

Telescope Main Tube

and 

Equatorial

Mount

. Note: Before assembling tripod legs to 

Equatorial Mount

,

make sure the 

Accessory Tray Braces

 face inward. Loosen long bolts

at the top of

Tripod Leg

. Carefully remove 

Telescope Main Tube

from

Cradles

. Position the mount over the 

Tripod Leg

as shown (fig. 2). and

secure 

Equatorial Mount

to 

Tripod Leg

. Repeat on the remaining two

Tripod Legs

. Once you have attached all 

Tripod Legs

to the mount,

securely tighten all wing nuts and place 

Telescope Main Tube

back

into 

Cradles

.

2.

Locate the 

Finderscope

with pre-assembled 

Finderscope Mount

.

Remove the two nuts located near the front of the telescope (closet to
the eyepiece) and place the 

Finderscope

and 

Finderscope Mount

over the exposed screws. Replace the nuts, and securely tighten the

Finderscope 

and 

Finderscope Mount

in place.

Attach Accessory Tray

1.

Fold down the accessory tray braces and place the Quick Release Accessory Tray on top of braces.

2.

Turn accessory tray until is snaps into place.

3.

Adjust tripod leg height to suit by opening tripod leg lever and extending tripod legs to desired height.
Clamp Tripod Leg lever closed when complete.

Attach Control Cables, Counterweight and Eyepieces

1.

Locate the 

Fine Adjustment Cable

. Loosen the silver screws located at the end of the 

Fine Adjustment

Cable 

and attach the 

Fine Adjustment Cable

to the silver post found on the 

Equatorial Mount

.

2.

Locate the 

Counterweight

and 

Counterweight Shaft

. Loosen the thumb screw located on the

Counterweight

and slide the 

Counterweight

onto the 

Counterweight Shaft

, then and tighten thumb

screw to secure the 

Counterweight

. Thread the 

Counterweight Shaft

into the hole located directly

below the 

Declination Lock Knob

. Make sure that the shaft is securely locked into mount.

3.

Insert 

Eyepiece

into focusing tube to begin viewing. 

8.

(fig. 2)

Summary of Contents for Northstar 78-7846

















Reviews: