7
3.
Log in and click the Camera icon
at the bottom of the screen, then
click “+” to add a new camera. Scan
the QR code on the label inside your
camera again or manually enter its
serial # to associate this camera
with your account.
4.
Remove the protective plastic
covers from the camera lens, and
PIR sensor.
5.
Install 12 AA batteries (Energizer®
lithium batteries are recommended.
Alkaline batteries may be used
but battery life will be shorter.
Rechargeable batteries are not
recommended). Be sure to position
the batteries for correct polarity
(+/-) when installing.
6.
Install a new SD card, up to 32GB.
High speed cards (class 6 or higher)
are recommended if you plan to
record video clips.
7.
At the location where you
will place the camera, move the
power switch to the On position.
The camera’s default settings
were chosen for typical usage as
x12
on
off
