Bushnell 368150, User Manual

Page: 18 / 26

18
Options Menu
(Map Course)
Options
If you need to edit or create the course name, 2.
select COURSE NAME and press OK/SHOT .
Names should be different from any of your
other golf courses to avoid duplication or
confusion. If you’re editing an existing course
and don’t want to change the name, skip to
step 4.
Using the 3.
UP/DOWN
buttons, scroll to
highlight each character and press
OK/
SHOT . To delete characters, scroll to “DELETE”
and press OK/SHOT . When finished, scroll to
highlight “SAVE” and press OK/SHOT .
Next, select MAP GPS POINTS and press 4.
OK/
SHOT ( Fig. 16 ). Select the hole ( Fig. 17 ), then
the default name for the point ( Fig. 18 ) and
press OK/SHOT .
If editing an existing point, select its name 5.
from the list, then press
OK/SHOT
while
standing at the point to register its new
location. When creating a new custom point
select CSTM 1 (CSTM 2, etc) and press OK/
SHOT
, You can then select ABBREVIATIONS
(
Fig. 19
) and pick from the list (CREEK, SAND,
HZRD, etc.), or give it your own USER DEFINED
name. Next, make sure you are standing at the
point, and press OK/SHOT to register it. You
can also just accept the default name (CSTM
1) and go directly to REGISTER POINT.
Fig. 16
Fig. 17
Fig. 18
Fig. 19