7 | Maintenance
26 / 36
0870206364_WV1200-2400A_Ex_-0004_IM_en
7.1 Maintenance Schedule
The maintenance intervals depend very much on the individual operating conditions. The
intervals given below are desired to be considered as starting values which should be
shortened or extended as appropriate. Particularly harsh applications or heavy duty oper-
ation, such as high dust loads in the environment or in the process gas, other contamina-
tion or ingress of process material, can make it necessary to shorten the maintenance in-
tervals significantly.
Interval
Maintenance work
Monthly
.
• Check the machine for oil leaks - in case of leaks have
the machine repaired (contact Busch).
After the first 500 hours
• Change the oil of the gear and bearing housings
(both sides), see
.
Every 6 months
• Perform an oil inspection; change it if the oil has
changed its initial colour, see
Every 5000 hours, at the latest
after 1 year
• Change the oil of the gear and bearing housings
(both sides)
• Clean the magnetic plugs (MP)
Yearly
• Carry out a visual inspection and clean the machine
from dust and dirt.
• Check the electrical connections and the monitoring
devices.
Every 16000 hours, at the
latest after 4 years
• Have a major overhaul on the machine (contact
Busch).
Every 20000 hours, at the
latest after 5 years
• Have a major overhaul on the machine (contact
Busch).
Specific intervals according to
the coupling instructions.
• Check the backlash and the wear of the coupling, see
.
7.2 Oil Level Inspection
• Shut down the machine.
• When the machine is stopped, wait 1 minute before checking the oil level.
MAX
MIN
MAX
MIN
MAX
MIN
• Fill up if necessary, see
.
