Bush WMDF814B, Instruction Manual

Page: 21 / 39

Functions
Simple everyday use
Functions 21
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Start/Pause button
By pressing on the Start/Pause button, you may start the
programme you have selected or suspend a running
programme. If you switch your machine to the standby
mode, the start/pause LED indicator on the electronic
display will blink.
Child Lock
To avoid programme flow from being affected if
programme buttons are pressed or programme button
is turned when performing washing operation in your
machine a child lock is available.
Press and hold both the Delay and Extra Rinse buttons
for 3 seconds to activate the child lock.
‘’CL’’ symbol will flash on the electronic display when
activated.
If you press any button, while the child lock is active, the
“CL” symbol will blink on the electronic display.
If while the child lock is engaged and any programme
is running, the programme knob is switched to the
CANCEL position and another programme is selected,
the programme previously selected continues from
where it left off.
To deactivate the child lock, press and hold the same
buttons used to activate it for 3 seconds, and the ‘CL’
symbol on the display will turn off.
Cancelling Programme
If you want to cancel any programme running:
1- Turn off the programme knob to STOP (OFF) position.
2- Your machine will stop the washing operation and
the programme will be cancelled.
3- To get rid of the water accumulated in the machine
switch the programme knob to any programme.
4- Your machine will perform the necessary discharge
operation and cancel the programme.
5- You can run your machine by selecting a new
programme.
Finishing Programme
Your machine will stop by itself as soon as the
programme you have selected finishes.
- “End” led will blink on the display panel.
- You can open the machine’s door and remove the
laundry.
- Leave the door of your machine open to allow the
inner part of your machine to dry after removing your
laundry.
- Turn the programme knob to cancel position.
- Unplug your machine.
- Turn off the water tap.
Start/
Pause
4
Extra Rinse
3
Delayed Start