Bush TT1608, Instruction Manual

Page: 24 / 28

Product support
Help is always at hand
Product support
24
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Troubleshooting
No power:
• Check the power plug connection at the wall socket.
• Press and release the large rotary control to power on the Turntable.
The tone arm skips grooves, slides over the record or does not move
• The Turntable is not on a flat surface. Please move the Turntable to a flat and stable surface
• The record is dirty or scratched. Clean the record with a record cleaner or play a different record.
The Turntable speed is incorrect.
• Select the correct speed according to the specification on the record. (33 or 45 RPM).
Unable to pair with a Bluetooth device:
• Check that you are in Bluetooth mode.
• Ensure that you are within range of the Turntable for Bluetooth functionality, 10 metres or less (33 feet or less).
• Move any other unnecessary Bluetooth devices/electrical equipment away from the Turntable and if possible,
turn them off or disable their Bluetooth functionality.
No sound / Sound distortion:
• Check that the speakers are connected correctly and the RCA plugs are pushed fully home into the RCA
sockets on the back of the Turntable.
• Adjust the volume
• The stylus is dirty. Clean the stylus with a soft brush.
• The record is dirty or dusty. Clean the record with a record cleaner.
• If you are using Bluetooth, adjust the volume on the secondary connected device and on your Turntable
• Check that you are in the correct mode for the music that you wish to listen to.
Turntable powers off:
• Your Turntable has been designed to automatically Power off after approximately 30 minutes without an audio
signal, to save power. Press and release the large rotary control on the Turntable to turn the product back on
again.