Bush SP-925, Instruction Manual

Page: 6 / 16

3 4
Using your Bush Splashproof Speaker
Getting start
Fig. 1
Fig. 2
5
1. The Bluetooth speaker has built in lithium ion rechargeable battery.
2. Keep POWER SWITCH (4) at off position.
3. Connect the micro USB plug of the provided USB cable to the USB charging
port (5) of the Bluetooth speaker, and connect the other end to a 5Vdc USB
output of computer or USB charger. (Fig. 1)
4. The red light next to USB port (5) will light up to indicate the charging status.
The red light will turn off when the battery is fully charged. (Fig. 2)
5. It is highly recommended to fully charge the Bluetooth speaker before use.
* Use 5V/1A USB charger or computer to charge the Bluetooth speaker. It
will take around 3 hours if the battery is exhausted.
4
6
Power up & pair Bluetooth
POWER switch (4)
1. Switch on the power by pushing POWER switch (4) downward. Blue light
next to the USB port (6) is flashing. Bluetooth mode is entered
automatically. If no device has been paired, it will start pairing. (Fig. 3) A
sound signal is played.
Fig. 3
2. Turn on your Bluetooth pairing mode of your smart phone or computer.
Inside the paring page, select SP-925. The blue light will be steady if the
speaker is paired up. A sound signal will be played also.
It is ready to play music now.
Play music
PLAY/PAUSE/PHONE button (2)
1. Press once the PLAY button (2) to play music. Press once again to pause.
(Fig. 4)
Fig. 4
2