Bush PT-951, Instruction Manual

Page: 24 / 36

Using your Party Speaker
Let’s get started
Using your Party Speaker 24
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Aux in mode
If you are not already in Aux in mode, short press the Power/M button to go to Aux in
mode. Check the display.
1.
Connect one end of a 3.5mm audio cable (not supplied) to the headphone (or
auxiliary out) socket of your secondary device. Connect the other end to the AUX IN
socket on the top of your Party Speaker.
2. Press the Play button on your external device to start playback through the Party
Speaker.
3. To gain optimal volume levels, adjust the volume level on both the secondary device
and on the Party Speaker.
Note: After you have finished listening to your external device we recommend that you
unplug the audio cable from the Aux in socket.
USB MP3 socket
With your Party speaker you can play MP3, WAV and WMA music files directly from a USB
stick.
Note: When you plug a USB stick into the USB MP3 socket, it will directly override the
product mode selection.
With your Party speaker in any mode:
1.
Plug the USB stick with the music files into the USB MP3 socket. After a short delay the
files on the USB stick will begin to play.