Bush NE-2600, Instruction Manual

Page: 17 / 30

17
Using your Kitchen DAB/FM Radio
Let’s get started
FM OPERATION
Switching from DAB to FM Mode
To switch the unit from DAB to FM mode, press MODE once.
Auto Scan
To search for an FM station, turn SCROLL Dial and then press the same the Dial SELECT to start the
forward or reverse scanning.
Once a station has been found, the scanning will stop automatically.
Manual Scan
To search for FM stations manually, turn
SCROLL
Dial repeatedly until your desired frequency is
reached.
With FM radio, it may be necessary to fine tune each station by turn SCROLL Dial to your
desired by adjust the frequency by 0.05 MHz. If reception is still poor, adjust the position
of the aerial or try moving the radio to another location.
Scan Setting
This is a scanning option to scan all stations, or just scan stations with strong signal.
1. Press
MENU and then turn SCROLL Dial to select <Scan Setting> . Press the same the Dial
SELECT to confirm selection.
2. Turn SCROLL Dial to select <Strong Stations Only> or <All stations> . Press the same the Dial
SELECT to confirm selection.
Audio Setting
FM is able to search for Stereo or Mono stations.
1. Press
MENU and then turn SCROLL Dial to select <Audio setting> . Press the same the Dial
SELECT to confirm selection.
2. Turn SCROLL Dial to select <Stereo Allowed> or <Forced Mono> . Press the same the Dial
SELECT to confirm selection.
The unit will automatically switch between stereo and mono when <Stereo allowed>
is selected depending on the signal strength, but you can override this and switch this
function manually. This is helpful when receiving poor signal reception.