Bush M50152SB, Instruction Manual, Page: 19 / 34

1. Remove the four screw caps and two
catches with the even- slot screwdriver.Then
remove the screws on the top which fix
the roof with the cross-slot screwdriver.
2. Remove the screws fixed the top-hinge with
cross-slot screwdriver.
3. Replace the top-hinge and the top-door limit
block and the door bearing bush to the other
side.
A. Remove the nut with sleeve.Take off the
washer then remove the axes to the other side
and fixed.
B. Remove the top door limit block
C. Please taking out another door limit block
with screw mounting to the door
4. Remove the screws which fixed the bottom-
hinge. Two people may be required to incline
the unit to less than 45°.
5. Replace the bottom door bearing bush and
the limit block.
6. Replace the bottom hinge to the other side
then fix it with screws.
7. Replace the mid-hinge.
8. Set the bottom door in right position,fix the
mid-hinge.
9. Replace the top-hinge.
10. Set the top door in right position,fix the top-
hinge and the cover.
11. Install the four screw caps and two catches
to corresponding position.
12. Replace the leveler to the other side and
adjust it to make sure the cabinet level.
a. Rotate feet clockwise to heighten;
b. Rotate feet anti-colckwise to lower.
Door Reverse
levelling the appliance
Front door
18
2 people may be required
Screw three
1
2
3
4
5
7
8
6
9
10
A B
C
remove these
screws
catches two
screw cap
(
two
)
replace the
leveler to
another side