Bush KBB-813A, Instruction Manual, Page: 20 / 36

Using your Kids Boombox with Microphone
Let’s get started
Using your Kids Boombox with Microphone
20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
In CD mode, with the CD you wish to programme in the CD compartment and stopped:
1. If the CD is playing press Stop to stop.
2. Press and release the Program button, ‘01’ flashes in the display.
3.
Use the Skip or Skip buttons to go to the track number that you would like to
program to play first. Press and release the Program button to confirm.
4. ‘02’ will now be flash in the display and you can select the second track that you
would like to programme. Continue to select each track as in Steps 2 and 3 above, up
to a total of 20 tracks.
5. Press and release the Program button twice after your final selection, to confirm the
last track in the programmed play list. Your boombox will display the numbers of the
tracks in the order that they have been saved into the programmed play list.
6.
Press and release the Play/Pause button on the boombox to play the programmed
tracks.
7. To exit programmed play mode, press and release the Stop button twice.
Repeat mode
You can select to repeat a single track or all of the tracks on the CD or in the saved
programmed play list.
Repeat current track only.
• Press and release the Repeat button once whilst a track is playing, a red dot will
appear after the track number and will flash in the display.
Repeat all tracks.
• Press and release the Repeat button a second time, the red dot after the track
number will remain steady on.
Cancel repeat.
• Press and release the Repeat button a third time to switch off repeat mode.