ICS11BTi Instruction Manual
5
Installing the Unit
Detach the mounting sleeve (D) and frame (B) from the unit housing. Use the
assembly keys (C) to do so.
Fit the mounting sleeve into the ISO dashboard slot.
Bend the mounting sleeve tabs over with a screwdriver so that the frame is mounted
securely in the dashboard slot.
Check that the frame is secure.
Connect the ISO connection of the unit to
the two ISO connectors of your vehicle.
Connect the antenna cable of the vehicle
antenna to the antenna adapter of the
unit.
If necessary, also secure your unit
against theft. Fasten the screws to the mounting bracket and to the mounting
material on the engine firewall of the car.
Slide the unit carefully into the mounting sleeve, until it clicks into place.
After all connections have been made, press the
RESET
button using a ballpoint pen
or other pointed object.
Attach the control panel (A), as described under “Attach control panel“.
CAUTION:
Possible damage to the cables!
►
When inserting the unit, pay attention to the cable routing to prevent damage.
►
Then mount the frame.
