HORIZON
12
Set Alarm
The procedure to set the alarm is:
1. Press the
ALARMS
Button, the radio will display
‘Alarm 1 Setup’, to set alarm2, simply need press the
ALARMS
Button again, and the relevant alarm icon will flash.
2. Using
‘
set alarm 1
’ as an example, when your radio says ‘Alarm 1 Setup’
Press the
SELECT
Button, your
radio will run into
‘
Alarm 1 Wizard
’, follow your radio’s instructions to configure the following parameters:
Alarm state
: Off/ On, press the
or
Button to
‘On’ to turn the alarm on, press the
SELECT
Button to
confirm.
If ‘Off’ is selected, the alarm will be turned off immediately and you will exit the alarm settings.
On time
: 00: 00 (alarm sounding time). Modify using the
or
Buttons and the
SELECT
Button to confirm
the alarm time.
Duration time
: 15/30/45/60/90minutes (alarm sounding lasting time). Modify using the
or
Buttons and
the
SELECT
Button to confirm the setting.
Source
: Buzzer/DAB/FM. Modify using the
or
Buttons and the
SELECT
Button to confirm the setting.
Alarm sounds frequency
: Daily, Once, Weekends or Weekdays. Modify using the
or
Buttons and the
SELECT
Button to confirm the setting.
Alarm volume
: press the
or
Button to your favor alarm volume, and then press the
SELECT
Button to
confirm the volume
, your radio will say ’
Alarm Saved
’.
To Operate SNOOZE
When the Alarm sounds and you wish to activate the snooze, press the
SNOOZE
Button repeatedly to
navigate between 5/10/15/30 minute snooze settings. Setting snooze will delay the time that the alarm
sounds once again by the set amount of time.
The radio will go into Standby mode and start to count down the defined snooze time.
The Alarm will sound again after the snooze time has elapsed, by then, if you press the
SNOOZE
Button
again and it will count down for the set snooze time, or you also can press the
STANDBY
button to stop
snooze, and to have your radio play again.
To Turn Off the Alarm
Note
: a. To turn the alarm off while the alarm is sounding, press the
STANDBY
button.
Refer to the above steps 1-2
in “Set Alarm”, when the ON/OFF options appear for
Alarm state,
press the
or
Button to select
‘Off’, press the
SELECT
Button to confirm,
‘
Alarm Saved
’ will be displayed and the alarm will be
cancelled.
Get SW Version
1. The path is: Press and hold the
MODE/MENU
Button, and then press the
Button to
SW version
menu setting.
.
2. Press the
SELECT
Button to confirm. You will now be able to view the software information of this radio.
System Settings
