Bush HA42U5232MEKB, Instruction Manual

Page: 62 / 100

Advanced features
Getting the most from your TV
Advanced features 62
If you require any technical guidance or fi nd that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk .
Inputs
To enter this menu option, select the icon while on the Home Page or press the [MENU] button on the remote
control when in television mode, then go to Settings > Device Preferences > Inputs.
You can select your desired source from this menu. It is also possible to do this by pressing the [SOURCE] button on
the remote control. The number and type of inputs will depend upon the model and speci fi cations of your set.
HDMI Control
– Turn HDMI CEC on and o ff .
Device auto power o ff
– If disabled, the connected device does not turn o ff
automatically when the television is turned o ff .
TV auto power on
– If disabled, the television does not turn on automatically when the
connected device is turned on.
HDMI EDID Version
– Shows the currently installed HDMI EDID version number.
CEC Device list
– Displays the HDMI CEC device list.
Note : You can go directly to the DTV source (if tuned in), by pressing the numbered
buttons on the remote control, i.e. pressing the number [1] will switch the set to
channel 1. Alternatively, you can press the
[TV] button on the remote control.
Features Available to Compatible CEC Devices
Blu-ray/DVD player
1 . Automatically turns the television on and switches the input to the connected Blu-ray/DVD player when the Blu-
ray/DVD player starts to play.
2 . Automatically turns the connected Blu-ray/DVD player o ff when you turn the television o ff .
3 . Controls menu operation [ARROW] buttons, playback and track selection of the connected Blu-ray/DVD player
through the TV’s remote control.
AV Receiver
1 . Automatically turns the connected AV receiver on and switches the sound output from the TV speaker to the audio
system when you turn the TV on. This function is only available if you have previously used the AV receiver to output
the TV’s sound.
2 . Automatically switches the sound output to the AV receiver by turning the AV receiver on when the TV is turned on.