Bush DWFS147SS, Installation & User'S Instructions

Page: 9 / 26

Adjusting the tension of the door spring
The door of the dishwasher is attached to springs. These are set at the factory to ensure that they are at the proper tension,
so that the door can open and close smoothly.
After the furniture door has been fitted, you will need to adjust the tension of the door spring.
Fully open the appliance door to allow access to the adjusting screws.
Using a 4mm Allen key, rotate the adjusting screw which are located on the front top corners of the appliance, to either
tighten or slacken the steel cable.
The doors spring tension is correct when
a) The door remains horizontal when in the fully opened position.
b) You are able to shut the door easily, by raising the door using your fingers.
WARNING: If you do not adjust the tension of the door spring, then it could cause damage to the appliance.
Top right tension
adjusting screw
8