You’ll soon be enjoying your new TV.
This guide will help you get started, full details of your TV and its features
can be found in the Instruction manual.
Connections
Bringing it all together
1
Getting to know your TV
You’ll be up and running in no time
2
Aerial connection
Connect the aerial TV plug to the AERIAL
INPUT (ANT) socket located on the back of the
TV.
(Fig 1)
Inserting Batteries into the Remote
Control
Remove the back cover to reveal the battery
compartment. Insert two size
AAA
batteries.
Make sure the (+) and (-) signs match (observe
correct polarity). Do not mix old and new
batteries. Replace only with same or equivalent
type. Place the cover back on.
Connect Power
IMPORTANT:
The TV set is designed to operate
on
220-240V AC, 50 Hz
socket. After unpacking,
allow the TV set to reach the ambient room
temperature before you connect the set to
the mains. Plug the power cable to the mains
socket outlet.
Connecting other devices to your
TV
See page 14 of the user guide for details on
which other devices you can connect to your
TV.
If you want to connect a device to the TV,
make sure that both the TV and the device are
turned off before making any connection. After
the connection is done, you can turn on the
units and use them.
Fig 1.
Switching On/Off
To Switch the TV On
Connect the power cord to a power source
such as a wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode
either:
• Press the
Standby
button,
Pro/-
or a numeric button on the remote control.
• Press the side function switch on the TV until
the TV comes on from standby.
To Switch the TV Off
Press the
Standby
button on the remote
control or press the side function switch on
the TV until the TV switches into standby mode.
To power down the TV completely, unplug
the power cord from the mains socket.
Note:
When the TV is switched into standby
mode, the standby LED can blink to indicate
that features such as Standby Search, Over
Air Download or Timer is active. The LED can
also blink when you switch on the TV from
standby mode.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the
Troubleshooting
section
of the Instruction manual or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 604 0105
.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the
Troubleshooting
section
of the Instruction manual or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 604 0105
.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the
Troubleshooting
section
of the Instruction manual or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 604 0105
.
Getting to know your TV
You’ll be up and running in no time
4
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the
Troubleshooting
section
of the Instruction manual or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 604 0105
.
Remote Control
1.
Standby:
Switches On / Off the TV
2.
TV:
Displays channel list / Switches to TV Source
3.
/-
4.
Menu:
Displays TV menu
5.
OK:
Confirms user selections, holds the page (in TXT
mode), views channel list (DTV mode)
6.
Back/Return:
Returns to previous screen, opens index
page (in TXT mode)
7.
Internet:
Opens the portal page, where you can reach
many web based applications
8.
YouTube:
Launches the YouTube application.
9.
Freeview Play:
Connects to the Freeview Play platform
where you can access available catch-up TV services
10.
Coloured Buttons:
Follow the on-screen instructions
for coloured button functions
11.
Language:
Displays and changes audio/subtitle
language (digital TV, where available)
12.
Rapid reverse:
Moves frames backwards in media
such as movies
13.
Pause:
Pauses the media being played
14.
No function
15.
Play:
Starts to play selected media
16.
Stop:
Stops the media being played
17.
Rapid advance:
Moves frames forward in media such
as movies
18.
Subtitles:
Turns subtitles on and off (where available)
19.
Screen:
Changes the aspect ratio of the screen
20.
Text:
Displays teletext (where available), press again
to superimpose the teletext over a normal broadcast
picture (mix)
21.
Media browser:
Opens the media browsing screen
22.
EPG (Electronic programme guide):
Displays the
electronic programme guide
23.
Exit:
Closes and exits from displayed menus or returns
to previous screen
24.
Directional buttons:
Helps navigate menus, content
etc. and displays the subpages in TXT mode when
pressed Right or Left
25.
Quick Menu:
Displays a list of menus for quick access
26.
Info:
Displays information about on-screen content,
shows hidden information (reveal - in TXT mode)
27.
Pro/-
28.
Mute:
Completely turns off the volume of the TV
29.
Source:
Shows all available broadcast and content
sources
30.
Numeric buttons:
Switches the channel, enters a
number or a letter in the text box on the screen.
31.
Netflix:
Launches the Netflix application, if this feature
is supported by your TV
Press
OK
button on the remote control to
continue and the
Network/Internet Settings
menu will be displayed, if you confirm the
previously displayed message asking whether
you want to do the network settings. Please refer
to
Connectivity
section to configure a wired
or a wireless connection. After the settings are
completed press
OK
button to continue. To skip
to the next step without doing anything select
No
and press the
OK
button when the message
is displayed asking whether you want to do the
network settings.
On the next screen you need to agree to the
terms and conditions of Freeview Play to make
use of the related services. Scroll the page to
read the entire text using the up/down directional
buttons or
Pro/-
buttons. Highlight
Yes
and press
OK
on the remote to confirm and
proceed. Highlight
No
and press
OK
to proceed
without confirmation.
After the initial settings are completed TV will
start to search for available broadcasts of the
selected broadcast types.
After all the available stations are stored, scan
results will be displayed. Press
OK
to continue.
The
Edit Channel List
menu will be displayed
next. You can edit the channel list according to
your preferences or press the
Menu
button to
quit and watch TV.
While the search continues a message may
appear, asking whether you want to sort
channels according to the LCN(*). Select Yes
and press
OK
to confirm.
(*)
LCN is the Logical Channel Number system
that organizes available broadcasts in accordance
with a recognizable channel number sequence
(if available).
Note:
Do not turn off the TV while initializing
first time installation. Note that, some options
may not be available depending on the country
selection.
Getting to know your TV
You’ll be up and running in no time
3
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press
OK
.
On the next screen, set your preferences using the
directional buttons.
Note:
Depending on the Country selection you
may be asked to set and confirm a PIN at this point.
The selected PIN cannot be 0000. You have to
enter it if you are asked to enter a PIN for any menu
operation later.
About Selecting Broadcast Type
Digital Aerial:
If
Digital Aerial
broadcast search
option is turned on, the TV will search for digital
terrestrial broadcasts after other initial settings are
completed.
You can activate
Store Mode
option at this point.
This option will configure your TV’s settings for
store environment and depending on the TV
model being used, the supported features of it
may be displayed on the top of the screen as an
info banner. This option is intended only for store
use. It is recommended to select
Home Mode
for home use. This option will be available in
System>Settings>More
menu and can be turned
off/on later.
